3mm ColorMax (1/8″) Wide Blade Guard Comb Genuine VUNRO ColorMax guard comb

Your length. A wider, smoother finish.

3mm ColorMax (1/8″) Wide Blade Guard Comb

CHF 21.95
Delivery to Switzerland Returns & guarantee
In stock and ready to despatch
Coat length
3mm
Blade system
Wide A5 only
Supplied
One guard comb
Fits #10W, #15W and #30W A5 blades onlyCheck compatibility ↗

Not for standard-width A5, D-Series, 5-in-1 or trimmer blades.
Fast, trackedClear dispatch updates 30-day guaranteeBacked by VUNRO support Secure checkoutProtected payment

Know the finish before you clip

3mm
Your length, clearly chosen.

A single ColorMax guard gives you repeatable length with the coverage of a wide blade. Prepare the coat, seat the guard securely and start longer if you are unsure.

Need every length? Explore the eight-piece set ↗
3mm ColorMax (1/8″) Wide Blade Guard Comb3mm · ColorMax · Wide A5 only

Bundle & save

Your wide-blade setup, made complete.

Choose only the extras you need. #10W, #15W and #30W are the compatible base blades for this guard; longer finishing blades are for clipping without a guard comb.

VUNRO grooming demonstration

See the wide-blade system at work.

Watch the VUNRO demonstration, then prepare the coat and fit the correct wide base blade before using your chosen guard.

Official VUNRO demonstration · wide blades and guard combs

Product details

The VUNRO ColorMax 3mm (1/8 inch) Wide Blade Guard Comb is our most advanced wide blade comb attachment, engineered from reinforced high density polymer and precision stainless steel for a smoother glide and rock steady stability. At 3mm it delivers a crisp, ultra close trim that cuts cleanly through thick, curly, or double coats without snagging or flexing.

  • 3mm length for a crisp, ultra close finish on demanding coats
  • Reinforced high density polymer resists heat and impact and locks in with a firm, secure fit
  • Precision stainless steel construction adds durability and a smoother glide
  • Upgraded teeth spacing cuts grooming time and reduces skin irritation

Designed for A5 Series #10W, #15W and #30W wide blades, including VUNRO, Wahl, Andis, and Oster. Please note it is compatible only with wide #10W, #15W and #30W A5 blades and is not suitable for standard width blades. Feel the difference on your very next groom.

Construction & performance
  • Built with hardened, high-quality polymer for lasting strength and shape retention
  • Stainless steel reinforcement bars for better rigidity and smoother glide through all coat types
  • Designed to reduce grooming time while ensuring even, uniform results
  • Glides effortlessly through thick, curly, or double coats without snagging or bending
  • Compatible with A5 wide blades (#10W, #15W, #30W) from
    VUNRO, Wahl, Andis, and Oster
  • Secure snap-on fit keeps combs firmly in place during use
  • Easy to clean and resistant to product buildup, rust, or corrosion
Grooming tips
  • Brush out tangles and mats, then wash and dry the coat completely.
  • Use light, consistent pressure with smooth, overlapping strokes. Do not force a guard through resistance.
  • Clip with the direction of coat growth for an even finish. Clipping against growth leaves a shorter result; start with a longer guard.
  • Use suitable scissors or smaller tools for paws, faces and fine detailing.
  • Check the blade temperature regularly and allow cooling breaks.
Professional tips
  • Ensure Thorough Coat Preparation: Always brush out tangles and mats before using wide comb attachments. Knots can cause the comb to snag, leading to uneven cuts and the risk of popping off mid-groom
  • Use with Proper Blade Size: Wide comb attachments work best with #10W, #15W, or #30W wide A5 blades. Avoid using them with any other blades, which can cause damage to both the blade and the comb​
  • Work on Clean, Dry Coats: For the best finish, make sure the coat is completely clean and dry. A well-prepped coat allows the comb to glide smoothly and reduces the need for multiple passes​
  • Use Reverse Grooming for Better Results: For smoother finishes, especially on straight, flat coats, start by clipping against the direction of the coat with a longer comb, then switch to a shorter comb with the coat's lay for a polished look
  • Monitor Blade and Comb Heat: Comb attachments can help reduce the heat transfer from metal blades, but always check the blade’s temperature during use. If the blade becomes too hot, switch to a cooled one or use a blade cooling spray
Care & maintenance
  • Rinse under warm water to remove debris
  • Use a soft-bristled brush for thorough cleaning
  • Dry completely before storing to prevent rust
  • Lubricate with oil to maintain performance
  • Store in a dry, cool place away from direct sunlight
  • Keep in a protective case to avoid damage
Your ColorMax questions, answered
Which clippers and blades can I use this with?

Use an A5-compatible clipper fitted with a wide #10W, #15W or #30W blade. This includes suitable VUNRO, Wahl, Andis, Oster and Heiniger A5 clippers. Check the blade—not just the clipper brand. Standard-width A5, D-Series and trimmer blades do not fit.

Can I use this guard with any wide blade?

No. Use #10W, #15W or #30W only. Longer wide finishing blades are for clipping without a guard; they are not suitable base blades for this attachment.

Which coat types is it suitable for?

The reinforced comb is designed for thick, curly, long and double coats that have been thoroughly brushed out. Do not force it through matting. Choose the grooming approach appropriate for the individual coat.

Is it only for larger dogs?

The wider coverage is useful on larger body areas, but it can also help with suitable body work on smaller dogs. Use smaller tools for paws, faces and sanitary detail.

How do I clean and store it?

Remove hair and debris after each use. Rinse when needed, use a soft brush and dry completely before storing in a protective case. Maintain and oil the clipper blade as instructed.

Why can a guard pop off?

Knots, matting or an incorrectly seated guard can pull the attachment loose. Stop, check the fit and brush out the coat before continuing. Do not use a damaged guard.

What is included?

One ColorMax wide guard comb in the length shown on this page. The base blade, clipper and other comb lengths are sold separately.

Need advice?

Not sure which guard or blade fits your clipper? Ask VUNRO before ordering.

Contact VUNRO · Grooming Adviser

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Verified customer reviews

Reviews for 3mm ColorMax (1/8″) Wide Blade Guard Comb

Read verified feedback from customers who bought this product.

Loading reviews for 3mm ColorMax (1/8″) Wide Blade Guard Comb…